GT2252 Model - 452187-0003 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 436182-0009 | Compressor housing | 1 | |||
1 | 433351-0001 | Bolt ( compressor side ) | 4 | |||
4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
- | 451298-0006 | C.H.R.A. | 1 | |||
25 | 434716-0005 | Turbine wheel | 1 | |||
10 | 436131-0001 | Compressor wheel | 1 | |||
8 | 433275-0002 | Bearing housing | 1 | |||
16 | 434689-0002 | Plate | 1 | |||
13 | 434685-0001 | Heat shield | 1 | |||
7 | 436313-0006 | Turbine housing | 1 | |||
6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
26 | 432340-0078 | Actuator | 1 | |||
27 | 413853-0001 | Nut ( actuator ) | 2 | |||
43 | 413885-0003 | Rod end ( actuator ) | 1 | |||
42 | 432502-0001 | Nut ( rod end actuator ) | 1 | |||
30 | 400729-0093 | Hose ( actuator ) | 1 | |||
31 | 451050-0001 | V clamp ( hose ) | 2 | |||
28 | 400702-0025 | Retaining ring ( actuator ) | 1 | |||
100 | 210218 | Gasket ( turbine inlet ) | 1 | |||
105 | 210270 | Gasket ( turbine outlet ) | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
155 | 431411-0840 | Stud outlet | 3 | |||
155 | 210407 | Stud outlet | 2 | |||
Pressure actuator Type = Pressure | Angles | |||||
1.000 - 1.040 bar = 1.00 mm | δ (delta) = 340º | |||||
ε (epsilon) = 100º | ||||||
Balance VSR | ||||||
0.8G between 0 - 60.000 rpm | ||||||
1.2G between 60.000 - 108.000 rpm |
Updated on August 17, 2008