GT1752H Model - 454061-0007 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 435791-0041 | Caracola admisión | 1 | |||
1 | 433351-0001 | Bolt ( compressor side ) | 2 | |||
4 | 403069-0177 | O ring ( compressor housing ) | 1 | |||
- | 433289-0010 | C.H.R.A. | 1 | |||
25 | 434714-0009 | Turbine wheel | 1 | |||
10 | 436131-0002 | Compressor wheel | 1 | |||
8 | 433275-0005 | Bearing housing | 1 | |||
16 | 434689-0004 | Plate | 1 | |||
13 | 434302-0001 | Heat shield | 1 | |||
7 | 435788-0026 | Turbine housing | 1 | |||
6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
26 | 433452-0003 | Actuator | 1 | |||
40 | 400724-0510 | Screw ( actuator ) | 2 | |||
43 | Rod end ( actuator ) | 1 | ||||
42 | 430893-0006 | Nut ( rod end actuator ) | 1 | |||
30 | 432996-0011 | Hose ( actuator ) | 1 | |||
31 | 400696-0009 | V clamp ( hose ) | 2 | |||
28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
100 | 210338 | Gasket ( turbine inlet ) | 1 | |||
105 | 210350 | Gasket ( turbine outlet ) | 1 | |||
111 | 430066-0005 | Fitting oil inlet | 1 | |||
112 | 435197-0006 | Washer ( racor ent. aceite ) | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
Pressure actuator Type = Pressure | Angles | |||||
1.067 - 1.133 bar = 4.00 mm | δ (delta) = 228º | |||||
ε (epsilon) = 130º | ||||||
Balance VSR | ||||||
1.0G between 0 - 90.000 rpm | ||||||
1.5G between 90.000 - 138.000 rpm |
Updated on September 10, 2008