GT1544S Model - 454092-0001 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 435791-0010 | Caracola admisión m. | 1 | |||
1 | 400724-0510 | Tornillo ( car. admisión ) | 4 | |||
2 | 435642-0001 | Clamp ( compressor housing ) | 4 | |||
4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
- | 435796-0018 | C.H.R.A. | 1 | |||
25 | 433290-0042 | Turbine wheel | 1 | |||
10 | 433246-0003 | Compressor wheel | 1 | |||
8 | 433275-0002 | Bearing housing | 1 | |||
16 | 433249-0001 | Plate | 1 | |||
13 | 434302-0001 | Heat shield | 1 | |||
7 | 435788-0009 | Turbine housing | 1 | |||
6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
26 | 435176-0006 | Actuator | 1 | |||
1 | 400724-0510 | Screw ( actuator ) | 2 | |||
43 | 413885-0003 | Rod end ( actuator ) | 1 | |||
42 | 432502-0001 | Nut ( rod end actuator ) | 1 | |||
30 | 432996-0007 | Hose ( actuator ) | 1 | |||
31 | 400696-0009 | V clamp ( hose ) | 2 | |||
28 | 400702-0025 | Retaining ring ( actuator ) | 1 | |||
95 | 433414-0001 | Elbow ( turbine housing ) | 1 | |||
96 | 432849-0002 | Screw ( elbow turbine housing ) | 2 | |||
96 | 432849-0003 | Screw ( elbow turbine housing ) | 2 | |||
100 | 210505 | Gasket ( turbine inlet ) | 1 | |||
105 | 210534 | Gasket ( turbine outlet ) | 1 | |||
111 | 435848-0003 | Fitting oil inlet | 1 | |||
112 | 435197-0005 | Washer ( oil inlet fitting ) | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
Pressure actuator Type = Pressure | Angles | |||||
0.950 - 1.001 bar = 1.00 mm | δ (delta) = 200º | |||||
ε (epsilon) = 332º | ||||||
Balance VSR | ||||||
0.65G between 0 - 90.000 rpm | ||||||
2.00G between 90.000 - 168.000 rpm |
Updated on November 11, 2008