GT2056S Model - 454126-0002 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 435791-0049 | Compressor housing | 1 | |||
3 | 434857-0003 | Compressor housing | 1 | |||
20 | 432998-0002 | Fitting ( compressor housing ) | 1 | |||
1 | 433351-0001 | Bolt ( compressor side ) | 4 | |||
4 | 403069-0177 | O ring ( compressor housing ) | 1 | |||
- | 433289-0096 | C.H.R.A. | 1 | |||
25 | 434715-0013 | Turbine wheel | 1 | |||
10 | 434802-0002 | Compressor wheel | 1 | |||
8 | 433275-0002 | Bearing housing | 1 | |||
16 | 701335-0005 | Plate | 1 | |||
13 | 434684-0001 | Heat shield | 1 | |||
7 | 435788-0038 | Turbine housing | 1 | |||
6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400677-0610 | Bolt ( turbine side ) | 4 | |||
26 | 433489-0012 | Actuator | 1 | |||
27 | 433226-0001 | Nut ( actuator ) | 2 | |||
43 | 433156-0001 | Rod end ( actuator ) | 1 | |||
42 | 433226-0001 | Nut ( rod end actuator ) | 1 | |||
30 | 432996-0008 | Hose ( actuator ) | 1 | |||
31 | 400696-0009 | V clamp ( hose ) | 2 | |||
28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
100 | 210360 | Gasket ( turbine inlet ) | 1 | |||
105 | 210350 | Gasket ( turbine outlet ) | 1 | |||
111 | 435848-0001 | Fitting oil inlet | 1 | |||
112 | 435197-0005 | Washer ( racor ent. aceite ) | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
150 | 432546-0002 | Stud ( turbine housing inlet ) | 1 | |||
Pressure actuator Type = Pressure | Angles | |||||
1.137 - 1.203 bar = 1.00 mm | δ (delta) = 342º | |||||
1.220 - 1.360 bar = 4.00 mm | ε (epsilon) = 195º | |||||
Balance VSR | ||||||
1.0G between 0 - 108.000 rpm | ||||||
2.5G between 108.000 - 150.000 rpm |
Updated on August 17, 2008