GT1544 Model - 454172-0002 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 435791-0056 | Caracola admisión | 1 | |||
1 | 433351-0001 | Bolt ( compressor side ) | 3 | |||
4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
- | 433289-0119 | C.H.R.A. | 1 | |||
25 | 433290-0042 | Turbine wheel | 1 | |||
10 | 433287-0004 | Compressor wheel | 1 | |||
8 | 435793-0002 | Bearing housing | 1 | |||
16 | 700593-0001 | Plate | 1 | |||
13 | 434302-0001 | Heat shield | 1 | |||
7 | 435788-0016 | Turbine housing | 1 | |||
6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
26 | 435176-0005 | Actuator | 1 | |||
40 | 400724-0510 | Screw ( actuator ) | 3 | |||
43 | 432012-0013 | Rod end ( actuator ) | 1 | |||
42 | 432502-0001 | Nut ( rod end actuator ) | 1 | |||
28 | 400702-0025 | Retaining ring ( actuator ) | 1 | |||
100 | 210293 | Gasket ( turbine inlet ) | 1 | |||
105 | 210296 | Gasket ( turbine outlet ) | 1 | |||
111 | 435848-0001 | Fitting oil inlet | 1 | |||
112 | 435197-0005 | Washer ( oil inlet fitting ) | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
Pressure actuator Type = Pressure | Angles | |||||
0.760 - 0.830 bar = 1.00 mm | δ (delta) = 273º | |||||
ε (epsilon) = 190º | ||||||
Balance VSR | ||||||
0.65G between 0 - 90.000 rpm | ||||||
2.00G between 90.000 - 168.000 rpm |
Updated on August 17, 2008