23:57:36 - Thu, Nov 21, 2024 -
10°C
10°C466874-0003 Parts List
TA2501 Model - 466874-0003 |
||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 3 | 431022-0008 | Caracola admisión | 1 | |||
| 2 | 400589-0375 | Retaining ring ( compressor housing ) | 1 | |||
| 4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
| - | 443854-0061 | C.H.R.A. | 1 | |||
| 8 | 435349-0012 | Bearing housing | 1 | |||
| 23 | 432236-0003 | Bearing | 2 | |||
| 24 | 444428-0001 | Retaining ring ( bearing ) | 3 | |||
| 12 | 435257-0005 | Turbine wheel | 1 | |||
| 13 | 431055-0001 | Heat shield | 1 | |||
| 11 | 400749-0006 | Piston ring ( turbine side ) | 1 | |||
| 19 | 443852-0002 | Thrust collar | 1 | |||
| 22 | 432254-0002 | Thrust bearing | 1 | |||
| 21 | 400810-0410 | Screw ( coj. empuje ) | 3 | |||
| 15 | 432280-0001 | Plate insercción | 1 | |||
| 17 | 403818-0009 | Piston ring ( compressor side ) | 1 | |||
| 20 | 403069-0163 | O ring ( plato insercción ) | 1 | |||
| 14 | 400589-0181 | Retaining ring ( plato insercción ) | 1 | |||
| 10 | 431350-0018 | Compressor wheel | 1 | |||
| 9 | 435255-0001 | Shaft nut | 1 | |||
| 7 | 432106-0002 | Turbine housing | 1 | |||
| 6 | 432726-0001 | Clamp ( turbine housing ) | 2 | |||
| 5 | 400677-0816 | Bolt ( turbine side ) | 4 | |||
| 100 | 210218 | Gasket ( turbine inlet ) | 1 | |||
| Pressure actuator Type = Pressure | Angles | |||||
| NOT USED | δ (delta) = 339º | |||||
| ε (epsilon) = 8º | ||||||
| Balance VSR | ||||||
| 1.5G between 0 - 80.000 rpm | ||||||
Updated on October 03, 2008