GT1241Z Model - 708001-0001 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 710395-0002 | Car. admisión | 1 | |||
1 | 433351-0002 | Bolt ( compressor side ) | 4 | |||
4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
- | 708247-0007 | C.H.R.A. | 1 | |||
25 | 703145-0002 | Turbine wheel | 1 | |||
23 | 704089-0001 | Bearing | 1 | |||
8 | 703516-0009 | Bearing housing | 1 | |||
10 | 708205-0002 | Compressor wheel | 1 | |||
7 | 711404-0002 | Turbine housing | 1 | |||
6 | 702837-0001 | V clamp ( turbine side ) | 2 | |||
78 | 703143-0001 | Screw ( v clamp ) | 2 | |||
5 | 701300-0001 | Nut ( v clamp ) | 2 | |||
26 | 712738-0002 | Actuator | 1 | |||
40 | 400724-0512 | Screw ( actuator ) | 2 | |||
43 | 432038-0010 | Rod end ( actuator ) | 1 | |||
42 | 432502-0004 | Nut ( rod end actuator ) | 1 | |||
28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
100 | 210505 | Gasket ( turbine inlet ) | 1 | |||
105 | 210694 | Gasket ( turbine outlet ) | 1 | |||
115 | 210382 | Gasket ( oil inlet and outlet ) | 1 | |||
150 | 432546-0002 | Stud inlet | 3 | |||
155 | 432546-0021 | Stud outlet | 4 | |||
170 | 710393-0003 | Fitting ( entrada y salida water ) | 2 | |||
171 | 444657-0003 | Washer ( racor entrada y salida water ) | 2 | |||
Pressure actuator Type = Pressure | Angles | |||||
0.455 - 0.515 bar = 1.00 mm | δ (delta) = 276º | |||||
ε (epsilon) = 201º | ||||||
Balance VSR | ||||||
0.65G between 0 - 96.000 rpm | ||||||
2.00G between 96.000 - 168.000 rpm |
Updated on December 07, 2009