GT1444S Model - 708847-0002 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
3 | 435791-0044 | Compressor housing | 1 | |||
1 | 433351-0001 | Bolt ( compressor side ) | 4 | |||
4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
- | 433289-0108 | C.H.R.A. | 1 | |||
25 | 701699-0001 | Turbine wheel | 1 | |||
10 | 436475-0006 | Compressor wheel | 1 | |||
8 | 433275-0002 | Bearing housing | 1 | |||
16 | 700593-0001 | Plate | 1 | |||
13 | 436494-0001 | Heat shield | 1 | |||
7 | 701748-0005 | Turbine housing | 1 | |||
6 | 434613-0001 | Clamp ( turbine housing ) | 2 | |||
5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
26 | 433452-0034 | Actuator | 1 | |||
40 | 400627-0510 | Screw ( actuator ) | 2 | |||
30 | Hose ( actuator ) | 1 | ||||
31 | V clamp ( hose ) | 2 | ||||
28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
100 | 210300 | Gasket ( turbine inlet ) | 1 | |||
105 | 210296 | Gasket ( turbine outlet ) | 1 | |||
111 | 434681-0002 | Fitting oil inlet | 1 | |||
115 | 210243 | Gasket ( oil outlet ) | 1 | |||
Pressure actuator Type = Pressure | Angles | |||||
0.850 - 0.910 bar = 1.00 mm | δ (delta) = 334º | |||||
1.120 - 1.270 bar = 4.00 mm | ε (epsilon) = 119.5º | |||||
Balance VSR | ||||||
1.5G between 0 - 138.000 rpm |
Updated on August 17, 2008