KTR110-1A Model - 6505-11-5103 |
||||||
---|---|---|---|---|---|---|
Figure | Part Number | Description | Quantity | |||
21 | 6505-11-2010 | Compressor housing | 1 | |||
22 | 6505-11-0450 | V clamp ( compressor housing ) | 1 | |||
- | C.H.R.A. | 1 | ||||
3 | 6505-11-3010 | Turbine wheel | 1 | |||
4 | 6505-11-0310 | Piston ring ( turbine side ) | 2 | |||
5 | 6505-11-0110 | Bearing | 1 | |||
2 | 6505-11-0710 | Heat shield | 1 | |||
14 | 6505-11-0011 | Bearing housing | 1 | |||
15 | 07000-62055 | O ring | 1 | |||
6 | 6505-11-0210 | Ring | 1 | |||
8 | 04022-04008 | Pin ( bearing housing ) | 1 | |||
7 | 6505-11-0150 | Thrust bearing | 1 | |||
9 | 6505-11-0250 | Flinger | 1 | |||
10 | 6505-11-0350 | Piston ring ( compressor side ) | 1 | |||
16 | 6505-11-0810 | Plate | 1 | |||
18 | 6505-11-0610 | Lockplate ( backplate bolt ) | 2 | |||
17 | 01010-30816 | Bolt ( backplate ) | 4 | |||
19 | 6505-11-1011 | Compressor wheel | 1 | |||
20 | 6505-11-0410 | Shaft nut | 1 | |||
1 | 6505-11-4110 | Turbine housing | 1 | |||
11 | 6505-11-0510 | Clamp ( turbine housing ) | 4 | |||
13 | 6505-11-0550 | Lockplate ( turbine housing ) | 4 | |||
12 | 01010-61016 | Bolt ( turbine side ) | 8 | |||
Gasket ( turbine inlet ) | 1 | |||||
210019 | Gasket oil inlet | 1 | ||||
210018 | Gasket ( oil outlet ) | 1 | ||||
Pressure actuator Type = Pressure | Angles | |||||
NOT USED | ||||||
Balance VSR | ||||||
NOT RELEVANT |
Updated on July 08, 2005